Vintage Leather Flight Jacket in Sheepskin Leather
Vintage Leather Flight Jacket
This vintage leather flight jacket captures the worn-in, lived-in character of a classic flight jacket without needing years to earn it — a genuine vintage finish applied to full-grain sheepskin, giving the leather natural cracking and tonal variation right out of the box. The stand/fold-down collar and knitted waistband and cuffs keep the silhouette true to the flight jacket's original utilitarian design, built here with real leather rather than a distressed-print imitation.
The Leather
Cut from full-grain sheepskin at 1.2mm, chrome-tanned with a medium temper, this leather holds enough structure to keep its shape through regular wear while still softening naturally over time. The vintage finish is what creates the jacket's aged, weathered surface — a genuine leather-finishing technique, not a printed or coated effect, which is why the texture holds up rather than wearing off. This piece anchors our Vintage Leather Jackets collection, and pairs well with our V-Bomber Jackets if you want to compare a more contemporary silhouette in the same weathered-leather spirit.
Construction
The front closes with a YKK #8 zipper, with two front patch/hand-warmer pockets secured by YKK #3 zippers — practical storage that doesn't disrupt the jacket's clean, classic lines. Topstitching runs at a consistent 8 SPI, with reinforced seams specifically at the stress points that see the most wear, rather than a single blanket reinforcement claim.
Knitted Details of vintage leather flight jacket
The waistband and cuffs use a 70% wool, 30% nylon 2×2 rib-knit at 450 GSM — a genuinely substantial knit that holds its shape and elasticity far longer than the thin, stretched-out ribbing found on lower-quality flight jackets. A full polyester lining lets the jacket slide on smoothly over layers.
Fit and Sizing
Not sure on sizing? Check our Size Guide before you order, since the knitted waistband and cuffs pull in more snugly than a jacket with an open leather hem.
Care
Wipe down with a soft, dry cloth and condition occasionally to maintain the leather's supple feel. The vintage finish will continue to develop character with wear — that's part of the intended look, not something to try to prevent. For more on how we source and finish our leather, see our Craftsmanship page.
FAQ
Is the vintage, worn look achieved through a real finish or printed on?
It's a genuine vintage leather finish, applied through the tanning and finishing process rather than printed or coated on top. That's why the texture and tonal variation hold up over time rather than wearing away.
How do the knitted cuffs and waistband hold up over time?
They're made from a 70% wool, 30% nylon rib-knit at 450 GSM, a substantial weight that resists stretching out compared to thinner, lower-quality ribbing found on many flight jackets.
Is this true to size given the knitted waistband?
The knitted waistband and cuffs sit more snugly than an open leather hem, so checking our Size Guide before ordering is worth doing, especially if you're between sizes.